NHTSA Recalls

2010 Peterbilt 320

4 open or recent recalls

4 open recalls

Open recalls

Units affected

Trucks in our DB

Carriers in DB

What this means

4 open or recent NHTSA recalls affect the 2010 Peterbilt 320. Recall repairs are free at OEM dealers — but only if you take the truck in. If you operate this model, verify recall service status by submitting the VIN at the OEM dealer or via NHTSA.gov. Insurance underwriters and freight brokers increasingly ask carriers to confirm recall service is current before contract loads.

All 4 recalls for this vehicle

NHTSA Campaign

19V452000

0 affected

Issue: PACCAR Incorporated (PACCAR) is recalling certain 1990-2020 Peterbilt 320 and 520 vehicles built with specific amber rear turn signals. The turn signals may also light up with the stop/tail lights when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108,

Fix: PACCAR will notify owners, and for trucks with rear amber lights, dealers will add a jumper harness between the chassis electrical harness and amber tail lights, free of charge. The recall began August 1, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this

NHTSA Campaign

15V309000

0 affected

Issue: PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankc

Fix: Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crank

NHTSA Campaign

15V108000

0 affected

Issue: PACCAR Incorporated (PACCAR) is recalling certain model year 2009-2015 Peterbilt 320, 365, 367, 388, and 389 trucks manufactured July 21, 2008, to February 28, 2014. The front axle tie rod end clamp bolts may be improperly torqued.

Fix: PACCAR will notify owners, and dealers will replace the front axle tie rod assembly on any vehicle where the factory installed assembly has not been previously replaced, free of charge. Owners were mailed interim notices on May 11, 2015. The recall began on April 4, 2016. Owners may contact Peterb

NHTSA Campaign

10V034000

0 affected

Issue: PETERBILT IS RECALLING CERTAIN MODEL YEAR 2010 320 TRUCKS EQUIPPED WITH HENDRICKSON HLR2 NON-STEERING PUSHER AXLE FOR FAILING TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE TRUCKS WERE NOT MANUFACTURED WITH THE REQUIRED NUMBER OF AIR TANKS FOR PROPER OPERATION OF THE VEHICLE'S BRAKE SYSTEM.

Fix: DEALERS WILL INSTALL AN ADDITIONAL AIR RESERVOIR TO THE AIR SYSTEM FREE OF CHARGE. THE RECALL BEGAN ON FEBRUARY 10, 2010. OWNERS MAY CONTACT PETERBILT AT 940-591-4196.

Frequently Asked Questions

Will an open recall fail a DOT inspection on a 2010 Peterbilt 320?

An open recall does NOT automatically fail a Level 1, 2, or 3 DOT roadside inspection — those focus on brake, tire, light, HOS, and driver-fitness items. However, if the recall affects a safety-critical component that is showing visible defect (cracked brake line, leaking fuel line, etc.) and the inspector identifies the defect itself, it can result in an out-of-service violation. Best practice: complete recall service promptly to avoid the question entirely. Recall completion is free at the dealer.

How do I check if my specific VIN has open recalls?

Three ways: (1) Enter your VIN at NHTSA.gov/recalls — free, instant. (2) Call any Peterbilt dealer and provide your VIN — they'll look up open campaigns. (3) Use our VIN decoder tool at /vin/ which cross-references against our recall database. The fastest is the NHTSA site; the most useful for fleet operators is the dealer call (they can also schedule the repair on the spot).

Who pays for recall repairs?

The manufacturer pays. Recall service is free at any authorized OEM dealer regardless of the truck's age, mileage, or who owns it now. The exception: if recall service is more than 10 years old, some manufacturers can decline (rare on commercial trucks). Peterbilt/320 recall service typically takes 1–4 hours of dealer shop time depending on the campaign — usually no charge for parts or labor.

What's the difference between a recall and a TSB on a Peterbilt?

A recall (NHTSA campaign) is a manufacturer-mandated safety repair — free and required. A TSB (Technical Service Bulletin) is the manufacturer telling dealers about a known issue and the recommended fix, but TSB repairs are typically NOT free — owners pay parts and labor. Recalls fix safety risks; TSBs fix quality/reliability issues that aren't safety-related. If you're seeing a problem that ISN'T on the recall list, search TSBs for Peterbilt 320 2010 — there may be a documented fix.

Can I keep operating a 2010 Peterbilt 320 with an open recall?

Legally yes (no federal law prohibits operating a vehicle with open recalls on a commercial truck — only some passenger-vehicle resale rules apply). Practically: depends on the specific recall. Safety-critical recalls (brakes, steering, fuel system) should be addressed immediately — both for safety and because insurance carriers and shippers increasingly track this. Less-critical recalls (lighting, infotainment) can wait until your next dealer visit. Always review the specific recall summary to understand severity.

Vetting a carrier? Talk to dispatch.

(682) 978-8641 Send a message

2010 Peterbilt 320

What this means

Related

Frequently Asked Questions

Vetting a carrier? Talk to dispatch.

Ready to Grow Your Trucking Business?